Best methods to purify water 100 percent for Drinking
As a matter of fact, Our ancestors were extremely inventive and, after realizing how important water is for their bodies, they looked for methods to purify it so they can drink it safely. That is why today, there are several safe methods to purify water when you’re out in the wilderness or when you’re at home.In the same way, Each one of the methods we are going to discuss is safe and each one was already tested more than several times so you can trust them completely.
First : boiling water
We all know that water boils when it reaches 100 degrees Celsius (212 Fahrenheit). We also know that there are very few bacteria that resist to temperatures that high for long time. Drawing the final conclusions, water can be purified through boiling, if you apply the method right.First step is to build a fire (if you’re in the wilderness) or simply lit the stove. Put the pot with water on the fire (if you don’t have a pot, use any fireproof container you have around) and wait until the water starts to boil (when it starts to make bubbles).
Continue heating the pot until the water starts boiling hard and then start timing. Let it boil for about 5 to 10 minutes according to the altitude you are situated at.
When the time is out, take the pot from fire and let it cool down. The cooling down period is also very good to allow solid items to settle at the bottom of the pot. After this, your water is safe to drink.
Things to remember: Usually boiling a pot of water for about 3 minutes kills the most bacteria and makes the water safe to drink. Still you need to keep in mind a few things:
Note: boiling won’t clean the water from heavy metal impurities;
it is best to let the water boil for more than 5 minutes. Some chemicals are eliminated through vaporization;
The boiling temperature drops with altitude, which means that after 5500 m boiling becomes inefficient. Also you should add an extra minute of boiling for every 300 meters above sea level.
Second: purification tablets or drops
This is not the tastiest method of purifying water but, in times of need, it doesn’t really matter. Tablets or drops leave a bitter taste in the water, after purification. There are a few types of drops and tablets but the most common ones are iodine and chlorine tablets. You can read more about types, uses, and products in our article on water purification tablets.Tips on how to use them in order to be the most efficient:
- Try filtering the water first if there are big particles floating around (you can use a clean cloth for this). This will be a first step to filtering and purifying your water. You can learn how to make a water filter using what you have around from this amazing step-by-step tutorial.
- The optimum water temperature should be about 21 degrees Celsius (68 Fahrenheit). At this point the tablets will be the most efficient.
- Don’t use expired tablets or ones that about to expire in a few days. These are not going to be as effective as fresh ones.
- The optimum quantity is one table for one quarter of the water quantity.
- Allow the tablets to dissolve completely in water by shaking the bottle. When the tablets are completely dissolved, wait 30 minutes before drinking.
- You should know that if the water is cold you have to wait about one hour before drinking. The coldness makes the tablets less efficient.
- Useful tip: If you have any flavorings like powdered forest fruits mixes, it may lessen the bitter taste and make the water easier to drink.
Third: use your wilderness skills to purify water
- This method will come in handy in case you are out in the wilderness and you don’t have the possibility to implement any other methods of purifying water. The method may seem a bit complicated and wild but it’s good to know how to purify water when there’s no pot, fire of tablets around to use.
- The process requires a few items you can find in nature like: birch bark (or any type of bark that is flexible enough to shape into a cone), a piece of rope (or some other flexible, strong material that you can use to tie the cone), charcoal, sand, gravel, and grass. A lot of weird items right? Here is how to use everything:
- After you find the right type of bark, cut a piece big enough to make a cone out of it. Use the rope or a strong piece of grass to tie the cone around to help it keep its shape.
- Add some layers into the cone that will filter and purify the water. Put the layers in this order: sand, charcoal, grass and gravel. The charcoal is especially effective in purifying the water.
- Pour water through the cone into a container. Repeat the operation at least three or four time to make sure most of the bacteria are gone.
- Remember: this method is not 100 percent efficient but it will remove the most bacteria from your water. If you have a good immune system it will fight off the remaining ones without any trouble. Anyways, you shouldn’t use this method unless there is an emergency and you are in absolute need of water.
Forth : use the sun to obtain pure water
- This is not a method we recommend to use when in distress. Obtaining pure water using the sun can be slow and the resulted quantity unsatisfying, so don’t count on it when you are facing a disaster. It’s more like a method to test when you’re out, on a new adventure, trying new things.
- You’ll need a big bowl or a recipient with large opening and tall walls, a heavy cup that goes inside the bowl without being taller than the bowl, clear wrap, and a big rock (and sun, of course).
- Put water you want purified in the bowl and add the cup inside. The cup should be heavy enough so it doesn’t float. Make sure no water gets inside the cup.
- Put the clear wrap over the bowl and seal the water and the cup in completely.
- Add the big rock on top of the clear wrap, over the cup.
- Put this entire arrangement in the sun.
- The principle is simple: heat from the sun will vaporize the water from the bowl.
- Still, because of the clear wrap, the water can’t go anywhere and drops of clear water will form in the inside of the wrap, sliding to the lowest point (here is where the rock shows its usefulness) dripping into the cup. It could take a few days to get a clear cup of water, which is why the method is not recommended when facing difficult times.
Fifth: using a water purifier
- Of all the methods, this could be the fastest and most efficient. There all sorts of water purifiers on the market but the most used one is the bottle with a built-in water purifier. It’s easy to carry one with you and you don’t add any extra weight to your backpack. The principle behind this bottle is quite simple: before letting the water in the bottle, they run it through the purifier to stop any bacteria or parasites that it may contain.
- There are several types of water bottles with a built-in filter on the market so you can choose according to your preferences and budget. There are also different types of straws on the market and we have an in-depth review for the Sawyer water filter.
- If you don’t have this type of water bottle (which we think you should have) you can use other types of water purifiers like:
- The ultraviolet pen – it’s light and easy to use. You just stick it in the water and wait for the light to turn green. When the light is green start stirring the water with the pen until the light goes off. Only then it’s safe to drink as the ultraviolet light killed all living things in the water.
- The gravity fed purifier – this type is quite large and it’s pretty hard to carry it around in a backpack. It’s best to use it at home or when you’re camping so you can have space to carry it.
- After depicting the most used methods of how to purify water we can definitely say that the most used one and the fastest is the filtering and boiling method. It’s better to filter the water through a dense, clean cloth in order to remove any sand, dirt or any other big particles. This way you won’t have to let the water to settle after boiling. Of course, it’s more recommended to use a water filter that is already built in your bottle but if you don’t have that luxury in the wilderness, a good boiling will do.
- Water is very important in our day-to-day sedentary life and we couldn’t carry on our activities without being hydrated. When in wilderness, doing physical effort or when you try to escape a disaster, your body eliminates more water through sweat. This is our natural cooling system that tries to keep our body at an optimal temperature, allowing it to function the way it should.
- If you’re not hydrated, your heart will have to work harder and you’re tissues will lose their strength and flexibility making you feel sick and without energy. Water is not an item to ignore when putting together your emergency pack!
- Now that you know how to purify water, with or without other items around, you can consider yourself prepared for surviving a massive disaster. We don’t appreciate it, but the fact that we have pure water at the tap is a pretty amazing thing. Still, it’s also a disadvantage because we are not prepared to find and obtain pure water when things get bad. Many people don’t like to get wild and adventurous preferring the comfort of a hotel when they go on vacations.
- This is actually a big downside regarding survival preparedness because it makes you think that everything is simple and easy to obtain. Going on an outdoor adventure with your friends can teach you many things about survival preparedness and how to live in the wilderness. Maybe it’s time to reconsider your vacationing style, don’t you think?
Searches related to how to purify water 100 percent
- 3 ways to purify water in the wilderness
- simple ways to purify water
- 5 ways to purify water
- three natural disasters
- which are two chemicals used to purify water
- water purification pdf
- methods of purification of water project
- how to purify water naturally